Firstly click on your apple icon then go to control panels the click on INTERNET SET-UP ASSISTANT.

This is the first screen you will see which will require you to click on YES.

You will then be taken to the page below on which you should click YES.

Click on to proceed to the next page.

On the screen shown below , type Localdial.Com for the name of the connection and make sure there is a TICK on the modem option then click to proceed onto the next page.

The next screen will require you to select which modem you're using, the selection you see here is the standard imac internal modem and no changes need be made. click to proceed to the next page.

The next screen will require you to type the phone number you wish to dial + your username + your password, once done click to proceed to the next page..

On this page you will need to select no to using a PPP script then to proceed to the next page.

On this page you will need to select no then to proceed.

The next screen will require you to enter two sets of numbers which are Localdial.Com's DNS server addresses, the numbers are as shown below in the screen shot, click to proceed to the next page.

This is where you will need to enter your Localdial.Com email address as shown below , also you'll need to enter your Localdial.Com connection password once done click on to proceed to the next page.

The next screen will also ask you for your Localdial.Com email address and also Localdial.Com's outgoing email server , which is post.localdial.com , click on to proceed.

The next screen will only require you to enter Localdial.Com's news server address , which is news.localdial.com , click to proceed to the next screen.

No should be selected on the screen below, then click to proceed.

Click GO AHEAD to finalise the connection and connect to Localdial.Com. if you do not wish to connect now , then click on QUIT on the next screen to stop the dialling process, then going to CONTROL PANELS / REMOTE ACCESS will bring up the configuration you just made.